ICEVCTRL=EVERYEDGE, ICEDGE=RISING, MODE=OFF, CUFOA=NONE, COFOA=NONE, CMOA=NONE, PRSSEL=PRSCH0
CC Channel Control Register
| MODE | CC Channel Mode 0 (OFF): Compare/Capture channel turned off 1 (INPUTCAPTURE): Input capture 2 (OUTPUTCOMPARE): Output compare 3 (PWM): Pulse-Width Modulation |
| OUTINV | Output Invert |
| COIST | Compare Output Initial State |
| CMOA | Compare Match Output Action 0 (NONE): No action on compare match 1 (TOGGLE): Toggle output on compare match 2 (CLEAR): Clear output on compare match 3 (SET): Set output on compare match |
| COFOA | Counter Overflow Output Action 0 (NONE): No action on counter overflow 1 (TOGGLE): Toggle output on counter overflow 2 (CLEAR): Clear output on counter overflow 3 (SET): Set output on counter overflow |
| CUFOA | Counter Underflow Output Action 0 (NONE): No action on counter underflow 1 (TOGGLE): Toggle output on counter underflow 2 (CLEAR): Clear output on counter underflow 3 (SET): Set output on counter underflow |
| PRSSEL | Compare/Capture Channel PRS Input Channel Selection 0 (PRSCH0): PRS Channel 0 selected as input 1 (PRSCH1): PRS Channel 1 selected as input 2 (PRSCH2): PRS Channel 2 selected as input 3 (PRSCH3): PRS Channel 3 selected as input 4 (PRSCH4): PRS Channel 4 selected as input 5 (PRSCH5): PRS Channel 5 selected as input 6 (PRSCH6): PRS Channel 6 selected as input 7 (PRSCH7): PRS Channel 7 selected as input 8 (PRSCH8): PRS Channel 8 selected as input 9 (PRSCH9): PRS Channel 9 selected as input 10 (PRSCH10): PRS Channel 10 selected as input 11 (PRSCH11): PRS Channel 11 selected as input 12 (PRSCH12): PRS Channel 12 selected as input 13 (PRSCH13): PRS Channel 13 selected as input 14 (PRSCH14): PRS Channel 14 selected as input 15 (PRSCH15): PRS Channel 15 selected as input 16 (PRSCH16): PRS Channel 16 selected as input 17 (PRSCH17): PRS Channel 17 selected as input 18 (PRSCH18): PRS Channel 18 selected as input 19 (PRSCH19): PRS Channel 19 selected as input 20 (PRSCH20): PRS Channel 20 selected as input 21 (PRSCH21): PRS Channel 21 selected as input 22 (PRSCH22): PRS Channel 22 selected as input 23 (PRSCH23): PRS Channel 23 selected as input |
| ICEDGE | Input Capture Edge Select 0 (RISING): Rising edges detected 1 (FALLING): Falling edges detected 2 (BOTH): Both edges detected 3 (NONE): No edge detection, signal is left as it is |
| ICEVCTRL | Input Capture Event Control 0 (EVERYEDGE): PRS output pulse and interrupt flag set on every capture 1 (EVERYSECONDEDGE): PRS output pulse and interrupt flag set on every second capture 2 (RISING): PRS output pulse and interrupt flag set on rising edge only (if ICEDGE = BOTH) 3 (FALLING): PRS output pulse and interrupt flag set on falling edge only (if ICEDGE = BOTH) |
| PRSCONF | PRS Configuration |
| INSEL | Input Selection |
| FILT | Digital Filter |